If you are ambitious enough to try this out at home, then best wishes to you on the research and development angle of your DIY project. Here is a brief introduction to that vital aspect of attempting a car radio installation independently. Perhaps enthusiasts do not require much motivation for this project.
Good and well to have such enthusiasm. Just make sure that you have that combination of requisite skills, and knowledge to do with how the car’s engine system works and how the audio system functions, and how these two systems will be interrelated.
But it goes without saying that the everyday (average) driver should be relying on a professionally managed installation anyhow. He or she will not have the wherewithal or patience to deal with a project of this magnitude. Apart from the different stages that need to be processed, does the average driver have all the tools required it is a sizeable toolbox to carry out this project efficiently from start to finish.
Just for starters, you’re going to need black tape, double sided tape, wire tires, crimpers, a drill, a flashlight, pliers, screwdrivers – More than one? Surely not – and a rubber mallet to do the work. So apart from still having to purchase the new car stereo system, there’s still another trip to make to the hardware store. And that’s if all or most of these ‘basic’ tools are not currently in your garage.
First and foremost four key steps of a car radio installation should be seriously considered. So, if you’re going to be making a brave attempt, read through these brief guidelines to help you decide whether or not to go through with this project.
Here then is a brief outline of each of these important stages. Your first step is to replace the current head unit. After that you’ll be powering up the system.
And then you’ve still got to install the speakers. And sub. Finally, you’ll need to tidy up your wiring system. Not only will you be focusing on the car interior’s aesthetics, you’ll also be taking into account safety. Replacing the head unit is critical because here you’ll be taking into account the correct size. The first stage of this project is nevertheless the easiest part. Things become a bit more complex when you start powering up the new system, bearing in mind that the entire audio system needs to work through just one amp.
Getting this far, installing the speakers and the subwoofer turns out to be the most rewarding part of your project. Or not. Because it is here that you get to hear what everything is going to sound like. But before that, you still need to wire everything up, cover the wiring, and then still install the fuse.
You should have some indication of knowing whether or not you’ll be capable of this master project. But be warned; not even the tip of the iceberg has been covered. This has all been just for starters.